Diagram 4
Multi-channel Audio Speaker Positioning
>0.5 m
(>1.6 ft)
>0.5 m
(>1.6 ft)
0.4 m - 0.6 m
(1.3 ft - 1.9 ft)
<0.5 m
(<1.6 ft)
Alternative wall
surround positions
shown. Surround
positions mirrored on
opposite wall.
Left
Left
Centre
Centre
Right
Right
Surround
Surround
Surround
Surround
>0.5 m
(>1.6 ft)
Note:
Dipole mode is selected via a switch on the rear of the
S4-DVC65. Speakers used in Dipole mode must be connected to
only one amplifier channel. The dipole switch should not be used
if a S4-DVC65 is connected to two amplifier channels for use in
stereo.
Note:
The directional characteristics of Studio Series in-ceiling
speakers can be optimised by rotating the Speaker Unit within its
Installation Frame and adjusting the tweeter tilt. See Section 4.1 for
more.
Note:
Studio Series in-ceiling and in-wall speakers are fully
appropriate for use in 5.1(2), 7.1(2), 9.1(2) multi-channel systems.
Studio Series in-ceiling speakers are suitable for use in Dolby
Atmos
®
installations.
Note:
The nature of the installation of in-ceiling and in-wall
speakers means that it is sometimes impractical to locate them in
acoustically optimal positions. Compromise is often more likely to
be necessary in multi-channel installations where positions have
to be found for multiple speakers. In these circumstances it is
preferable to favour the position of the front and centre channel
speakers over that of the surround channel speakers.
2018 Dynaudio CI manual - Item No. 307001016932 Rev N - EN.indd 10
05/01/2018 12.39
