Dynatone DPR-3500, Owner'S Manual

Page: 38 / 86

P
ia
n
o
S
e
tt
in
g
s
K
e
y
-O
ff
V
o
lu
m
e
/
H
a
m
m
e
r S
o
u
n
d
/ S
tr
e
tc
h
T
u
n
e
Key-Off Volume
Hammer Sound
Stretch Tune
When tuning an acoustic piano, the low strings are tuned a bit lower than their original pitches, and
the high strings higher, in order to accommodate the frequency difference of the harmonic series that
occurs depending on the tension and stiffness of the strings, balancing the pitches of the overtones
and preventing dissonance when playing multiple notes at once.
☞
Setting this OFF will result in the piano being 'flat-tuned', which means that the notes are tuned strictly according to
their basic pitches, disregarding the harmonic series.
☞
Range: ON, OFF (Default: ON)
☞
Press both DATA buttons simultaneously to restore its default value (ON).
On acoustic pianos, as the key is released there is the subtle sound of the dampers falling back onto
their strings again. The key-off samples of this piano bring the subtle yet essential sensation of key
release to life. This parameter determines the volume of this effect.
☞
Range: 0 - 4 (Default: 0)
☞
Press both DATA buttons simultaneously to restore its default value (0).
The acoustic piano creates sound by striking its strings with hammers, which is called the hammer
sound. This parameter controls the volume of the physical sound of hammers hitting the strings.
☞
Range: 0 - 100 (Default: 40)
☞
Press both DATA buttons simultaneously to restore its default value (40).
36