DATE
15/10/2020
REV
0
Maintenance company
Date:
Model / Serial No.
Reference of installation
1
PUTTING INTO SERVICE
FREQUENCY
OK
NO OK
DYNATECH
INSTRUCTIONS
OBSERVATIONS
1.1
Check the proper assembly of the car safety gear
First time before
putting into service
6.3.4 of EN 81:20
1.1.1 Visual check of general conditions
(1)
1.1.2 Check of the guide rail state
4.2
1.1.3 Length of marks on the guide rail
4.1
1.2
Check the proper assembly of the counterweight safety gear
First time before
putting into service
6.3.5 of EN 81:20
1.2.1 Visual check of general conditions
(1)
1.2.2 Check of the guide rail state
4.2
1.2.3 Length of marks on the guide rail
4.1
(1)
Check for wear or damage in the safety gear
2
MAINTENANCE
FREQUENCY
OK
NO OK
DYNATECH
INSTRUCTIONS
OBSERVATIONS
2.1
Visual inspection and visual check
6 month
4.2
2.2
Clean, absence of strange elements
6 month
4.2
2.3
Controlled engagement of car
12 months
4.2
6.3.4 of EN 81:20
2.4
Visual inspections of wears
12 months
4.1
3
OK
NO OK
DYNATECH
INSTRUCTIONS
OBSERVATIONS
3.1
4.3.1
adjust only if required
3.2
4.3.1
adjust only if required
3.3
4.3.1
adjust only if required
3.4
4.3.1
3.5
4.3.1
3.6
4.3.1
3.7
4.3.1
3.8
4.3.1
3.9
4.3.1
3.10
4.3.1
3.11
4.3.1
3.12
4.3.1
3.13
4.3.1
only if required
3.14
4.1
have a register list
3.15
4.1
3.16
Visual check governor linkage
1. GENERAL PROVISIONS APPLICABLE TO DYNATECH SAFETY GEAR
MAINTENANCE CHECKLIST
Check that there is no interference between shoe and guide rail.
Check that there is no interference between rollers and guide rail
Check the fixings and clearance between safety gear and frame
Clean grease, chips or dust inside safety gear.
Check rollers movement
Apply lubricant on the guide rail
Length of marks on the guide rail
Visual check for wear
Begining of marks on the guide rail
Visual check for damage and defects
Check driving bar state
Check car inclination
Check safety switch
Clean guide rail
Remove marks and chips from the guide rail
