INSTRUCTIONS : PR-2000-UD Cod : DYN 07.01.10
Date : 20/10/2020 Revision : 10
4
Lower limit
505
574
665
771
843
974
1130
P+Q (Kg)
537
621
719
834
911
1053
1222
Upper limit
577
668
773
843
979
1132
1314
Loads may be duplicated through configuration of this tandem safety gear. See Manual DYN 37/8 – Extendible
T25UD/T25 Tandem safety gear for further information.
3 INSTALLATION AND ADJUSTMENT
3.1 ASSEMBLY ON THE FRAME
The holes should be made on the frame’s uprights to secure the safety gear, according to the dimensions and
position displayed in the safety gear drawings attached (DYN 07.C002.00), ensuring that the guide rail’s axis
is centred with the frame.
To secure the safety gear onto the frame, we recommend a 79.09 Nm tightening torque for grade 8.8 M12
bolts, and of 111 Nm for grade 10.9 bolts.
Figure 2: Assembling the safety gear onto the
frame (1)
Figure 3: Assembling the safety gear onto the frame (2)
�
�
�
Safety gear position:
a) The safety gears should be assembled in the position displayed in Figure 4
b) A circle on one of the safety gear’s ends will indicate its upper part. This mark should always be on
the upper part during the assembly.
c) There should be an additional mark on the protection plate including the word “UP” and an arrow
indicating the safety gears’ upright position.
