P6: When cleaning is finished, there are circular notches on the window surface.
A: The cleaning cloth is too dirty, Please change it.
P7: What do I do if the DynaSun W110 crashes in a high place with no power supply, with a flashing red
light and an alarm sound?
R.
1. Retrieve the DynaSun W110 with the safety rope. Gently pull the safety rope at a corner near the
window to prevent it from falling.
2. Turn off the switch.
3. Check if the electrical connection has any problems or if there is a broken cable.
P8: What do I do if DynaSun W110 crashes erratically and flashes red light without alarm?
R:
1. Move the DynaSun W110 to a safe area with the remote control or safety rope. Gently pull the safety
rope at a corner near the window to prevent it from falling.
2. Turn off the switch.
3. Check for air leaks caused by holes or irregularities on the fixtures.
P9: DynaSun W110 does not stop automatically at the bottom of the window.
A: Press the button to stop the robot.
P 10: Can I use the robot without connecting it to the mains?
A: No, the robot needs to be connected to work and clean. The battery belongs to a safety system so that
the robot does not fall in case the light goes out.
SAFETY INFORMATION ON THE ADAPTER / BATTERY
• Use only the power adapter supplied with the product. Other types of adapters may cause errors and / or
damage.
• Use good power outlets and do not put anything heavy on the adapter or power cord.
• Make sure the adapter is properly ventilated when used. Do not cover it with objects that may obstruct
the ventilation.
• Do not use the adapter in humid environments, do not touch it with wet hands.
• Plug the adapter into a power outlet. The voltage requirements can be checked on the adapter.
• Do not use adapters, power cords or sockets that are broken or in bad condition,