16
Dynaset Oy | Menotie 3, 33470 Ylöjärvi | puh. 03 3488 200 | [email protected] | www.dynaset.com
HYDRAULIC MAGNETS
SAFETY
HMAG PRO magnet has two temperature switches that cut off the magnetization
if the temperature raises too high. In this case the collected metals will eventually
drop unexpectantly.
WARNING
DANGER OF GETTING CRUSHED!
Magnet will draw ferrous material around it
to itself when magnetized. Do not put
yourself between magnet and object that it
can draw to itself. Stay clear from the
magnet and the base machine’s reach.
Do not lift people with the HMAG PRO magnet.
Do not hang or grap the chains while lifting.
Do not let any person or animal get closer than 5 m when operating the HMAG
PRO magnet.
Do not drag HMAG PRO along the ground. Draging it might damage the magnet.
Do not release the scrap from HMAG PRO by swinging the unit.
When picking and moving scrap, twitches, sudden moves and reversals must be
avoided. Prior to starting to operate the HMAG PRO ensure clear visibility to the
magnet and its surroundings.
Do not cool the HMAG PRO magnet with water.
Do not use HMAG PRO magnet under water.
2.4. MAINTENANCE SAFETY
NOTE!
Keep the components of the system clean when carrying out any
maintenance to the HMAG PRO. This is to ensure safe, reliable and longlife
operation of your equipment.
Hydraulic system of the base machine must be maintained according to the
machines service program. READ CHAPTER ”6.1. Maintenance Intervals” for more
