Dynapac F1000T, Operation & Maintenance Manual

Page: 62 / 238

D 1.0 8
D_1.0_
01_U
S.fm 8
-
4
2
Item Designation Brief description
20
Drive lever
(traction)
For switching on the paver functions and for regulating the road
speed – forward or reverse.
Zero position: starting is possible; engine at idling speed; no
track drive; protected against inadvertent start.
To move the lever, lift the ring (20a) to release it.
Depending on the position of the drive lever, the following func-
tions can be activated:
- 1st position: Engine runs at preselected speed
(see "Travel drive/engine preselector
switch").
- 2nd position: Conveyor and auger on.
- 3rd position: Travel drive (propel) on; increase speed by
turning the speed control until it stops.
The maximum speed is set with the travel drive/engine
preselector switch and with the travel drive preselector.
The floating position function is only active when the
drive lever is moved from its central position!
If the drive lever is moved to the central position, the
paver automatically switches to screed stop.
21
Preselector switch
travel drive/engine
fast/slow
To preselect the desired speed level.
- Switch setting 0: Preselected vehicle speed "0"
- Switch setting 1: Vehicle speed – for paving with low
operating speed.
- Switch setting 2: Vehicle speed – for paving with high-
er operating speed.
- Switch setting 3: Transport speed – for transportation.