manualshive.com logo in svg

Dynapac F1000T, Operation & Maintenance Manual

Share
Download
Dynapac F1000T Operation & Maintenance Manual Download Page 231

F 10.0 3

F_1

0

.0_0

1_US.fm. 3-6

2

General observation

The daily check includes a walk around the machine while checking the following 

items: 

-

Are any of the parts or controls damaged? 

-

Are there leaks at the engine, the hydraulics, the gear box, etc.? 

-

Are all the locking points secure (conveyor, auger, screed)? 

Repair the damages and clean any spills immediately to avoid risks of accidents and 

environmental pollution! 

3

Check performed by a specialist

The paver, the screed and the electrical equipment MUST be checked regularly by a 

specialist:

-

as required (according to the circumstances of application and operating condi-

tions), 

-

however, at lease once a year, so that the machine retains its reliable operating 

condition. 

Summary of Contents for F1000T















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands