Dynapac DTR100, Operating Instruction

Page: 85 / 124

8.6 Weekly
8.6.1 Checking, cleaning the air filter
NOTICE!
Danger of engine damage!
– Do not start the engine after having removed
the air filter.
– If necessary, the air filter may be cleaned up to
six times.
– Cleaning does not make sense if the air filter
element is covered with a sooty deposit.
– Do not use gasoline or hot fluids to clean the
filter element.
– After cleaning, the air filter must be inspected
for damage using a torch.
– Do not continue to use a damaged air filter ele-
ment. If in doubt use a new air filter.
Protective equipment: n Working clothes
n Protective gloves
n Safety goggles
1. Park the machine safely
Ä
Chapter 6.6 „Parking the machine
in secured condition“ on page 68 .
2. Allow the engine to cool down.
3. Release both snap bows (1) and take off the cover (2).
4. Clean the cover and dust discharge valve.
5. Pull out the air filter with a slight turning motion.
NOTICE!
Danger of engine damage!
– Prevent dirt from getting into the air intake
opening.
– Do not clean the air filter housing with com-
pressed air.
6. Thoroughly clean the filter housing and sealing faces.
7. Clean the inside of the drain pipe in the filter housing thor-
oughly.
B-SYM-1074
Fig. 73
1
2
B-100-0009
Fig. 74
Fig. 75
Maintenance – Weekly
DTR100 85