Dynapac DTR100, Operating Instruction

Page: 117 / 124

7. Set the decompression lever to “Top” position.
8.
CAUTION!
Danger of injury caused by uncontrolled
machine movement!
– Always hold on to a running machine.
– Always keep an eye on a running
machine.
NOTICE!
The starter rope may tear off!
– Do not pull the starter rope all the way
against the end stop.
Pull the starter handle quickly and with power.
ð
After the engine has been started, the decompression
lever automatically moves back to the initial position
(“Bottom” position).
9. Manually guide the starter handle back to initial position.
10. If the engine does not start during the first attempt, repeat the
starting process.
ð
Always open the decompression lever when repeating
the starting procedure.
NOTICE!
Danger of engine damage!
– Warm up engine for a short while
before starting work. Do not operate
the engine immediately under full
load.
B-100-0024
Fig. 136
Fig. 137
B-100-0023
Fig. 138
Troubleshooting – Starting the engine with the recoil starter
DTR100 117