Dynapac DTR100, Operating Instruction

Page: 68 / 124

6.6 Parking the machine in secured condition
1. Drive the machine onto horizontal, level, firm ground.
2. Release the travel lever.
ð
Travel lever moves to neutral position.
Machine stops.
3. Set the throttle lever to “MIN” position (idle speed).
4.
NOTICE!
Danger of engine damage!
– Do not shut down the engine all of a
sudden from full load speed, but let it idle
for about two minutes.
Set the throttle lever to position “STOP”.
ð
The engine is shut down.
The warning buzzer sounds.
5. Turn the ignition key to position “0” and pull it out.
B-834-0248
Fig. 63
B-834-0244
Fig. 64
STOP
B-834-0243
Fig. 65
B-ELE-0069
Fig. 66
Operation – Parking the machine in secured condition
DTR100 68