Dynapac CC1250, Instruction Manual

Page: 52 / 74

Maintenance 46
7.2 Maintenance Schedule
Maintenance Schedule Information
The maintenance schedule shows those items requiring regular service and the interval at which they
are performed. A regular service program is geared to the items listed under each interval. These
intervals are based on average operating conditions. Before each consecutive interval is performed, all
of the maintenance requirements from the previous interval must also be performed.
Note
In the event of extremely severe, dusty, or wet operating conditions, more frequent
maintenance than specified is necessary.
N o t e
If the roller is operating under very severe conditions (such as very dusty air), the
scheduled maintenance intervals should be reduced
Table 7-1: Maintenance at Every 8 Hours or Daily
Description Action Lubrication
Engine oil Check
Outer air cleaner element Check
Radiator coolant Check
Hydraulic oil Check
Greasing Grease See lubrication chart
Table 7-2: Maintenance at First 50 Hours
Description Action Lubrication
Engine oil filter element Change See engine manual
Engine oil Change See engine manual
Fuel filter element Change See engine manual
Hydraulic oil filter Change
Pre fuel filter element Change
Table 7-3: Maintenance at Weekly/First 50Hrs
Description Action Lubrication
V-belt Check
Water separator Drain
AVM Bolts Check