Dynapac CC1250, Instruction Manual

Page: 33 / 74

Working Lights
Switch(Optional)
Depress the switch to switch on the working lights.
Depress the switch to switch on the rotating
beacon.
Figure 5-15: Rotating Beacon Switch
27 Operation Controls
Figure 5-13: Working Lights
Hazard Warning Lights
Switch
Hazard warning lights are primarily used to warn
other vehicles that there is a problem either with
the roller, or there is a hazard in front of roller
causing the operator to reduce speed quickly.
Depress the switch to switch on the hazard
warning lights.
Figure 5-14: Hazard Warning Lights
Rotating Beacon
Switch(Optional)
Rotating beacon lighting is generally used to warn
the approaching machine of potential hazards,
such as machine that is stopped or moving slower
than the rate of the traffic.
Direction Indicator Switch
The direction indicators are blinking lamps
mounted near the left and right, front and rear
corners of the roller. Depress the switch either left
or right, to on the left or right indicators. In the
intermediate position the function is shut off.
Figure 5-16: Directional Indicator Lights
Parking Brake On/Off
Switch
The parking brake On/Off switch is used to
activate the parking brake.
Not e
Parking brake must be activated while
starting the engine. Always activate
the parking brake when the machine is
stationary on a sloping surface.
Figure 5-17: Parking brake On/Off Switch