Dynapac CC1250, Instruction Manual

Page: 40 / 74

Inspections and Operations 34
6.2 Before Starting the
Engine
Remember to carry out daily maintenance before
starting the engine. Refer to
section 7 -
Maintenance .
Consider the following points before starting the
engine:
1. Before starting the engine, check inside,
outside, and underneath the roller for people
or obstructions.
2. Turn the battery disconnecter key to switched
on position which is located on the right side of
the operator compartment. This supplies the
roller with the power.
Figure 6-3:Battery Disconnecter
A Battery disconnecter
3. Check for warnings on the controls.
4. Start the engine from the operator position
only.
5. Avoid leaving the controls with the engine
running. Never leave the operator platform
while the roller is running.
If any controls, instruments, or devices do
not function correctly report the defects to
the proper personnel. Defects must be
corrected before starting and operating
the roller.
Seat(Standard) Adjustment
Adjust the operator’s seat to the comfortable
position so that the controls are within easy reach.
The seat is adjusted in the following way:
• Length adjustment : Pull the lever and move
the seat forward or back.
Figure 6-4:Seat Adjustments
A Length adjustment
!