Dynamix ITM Series, Installation, Operation & Maintenance Manual, Page: 9 / 23

R16 122016
9
Parts, Maintenance & Service – Stainless Steel Tote
Technical Drawing & General Parts List
This drawing is not exact.
It is only a typical representation of the ITM Series models. When noted, please contact your Dynamix representative with
your mixer serial number.
REF # PART NAME PART No.
1 MOTOR
Refer to mixer serial no. or
sales person to confirm specs.
2
GEAR REDUCER
(Optional) Refer to mixer serial no. or
sales person to confirm specs.
3
DYNAMIC COUPLING
FEMALE Refer to mixer serial no. or
sales person to confirm specs.
4
DRIVE SHAFT
COUPLER Refer to mixer serial no. or
sales person to confirm specs.
5
DYNAMIC COUPLER
MALE
50-701004
6
DYNAMIC COUPLER
O-RING
51-001009
7 STAINLESS STEEL LID
Refer to mixer serial no. or
sales person to confirm specs.
8
SHAFT ASSEMBLY
REBUILD KIT Refer to mixer serial no. or
sales person to confirm specs.
9
SHAFT ASSEMBLY
HOUSING Refer to mixer serial no. or
sales person to confirm specs.
10 MIXER SHAFT
Refer to mixer serial no. or
sales person to confirm specs.
11 IMPELLER ASSEMBLY
Refer to mixer serial no. or
sales person to confirm specs.
12 SHAFT PIN 90-PR-.2x1.25x420
All equipment design and application data shown herin and related info is confidential and the property of Dynamix
Agitators Inc. No use or disclosure therof may be made without written permission from Dynamix Agitators Inc.