Dynamic CCTV DTV-VLDpro-W6, User Manual

Page: 30 / 40

28 28
Vandal Resistant Dome Camera
● CAM TITLE :
If you enter a title, the title will appear on the monitor.
If the SPECIAL menu screen is displayed, use the Joystick
so that the arrow indicates 'CAM TITLE'.
Set it to 'ON' by using the Joystick.
Press the Joystick.
Use the Joystick to move to a desired letter and
select the letter by pressing the switch. Repeat this to enter
multiple letters. You can enter up to 15 letters.
Enter a title, move the cursor to 'POS' and press the Joystick.
The entered title appears on the screen.
Select the position to display the title on the screen by using the
Joystick and press. When the position is determined, select
'END' and press the Joystick to return to the SPECIAL menu.
● SYNC : In areas where the supply is at 60Hz(NTSC),
50Hz(PAL), you can synchronize the output phase of
multiple cameras using the power synchronization
function (Line-Lock) without using a synchronization
signal generator.(Dual power type only)
- INT : Internal Synchronization Type
- LL : Power Synchronization Type, Line-lock(AC type only)
Press the Joystick.
You can select a desired phase from 0 to 359 when select 'phase'.
FRONT DOOR
• When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even if you
enter one.
• Only English is available in the mode.
• If you move the cursor to CLR and press the Joystick, all the letters are deleted.
To edit a letter, change the cursor to the bottom left arrow and press the Joystick.
Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then
press the Joystick.