Dynamic CCTV DTV-VLDpro-W6, User Manual

Page: 20 / 40

18 18
Vandal Resistant Dome Camera
MAIN SETUP
▶
1.LENS DC
2.EXPOSURE
1. When the SETUP menu screen is displayed, select 'EXPOSURE’ by using
the Function Setup button so that the arrow indicates 'EXPOSURE’.
2. Select a desired mode using the Function Setup button.
● BRIGHTNESS : Adjusts the video brightness.
● SHUTTER : You can select the shutter.
- ESC : Select this to control the shutter speed automatically. If ESC is
selected, the shutter speed is automatically controlled
depending on the ambient illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL - 1/60sec~1/120,000sec, PAL MODEL-1/50sec~1/120,000sec)
● A.FLK : Select this when you experience picture flicker, this happen
when there is a clash with the installed lighting frequency.
● --- : Shutter speed is fixed at 1/60 sec (1/50 sec).
● AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen -
but the greater the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
● SENS-UP : When it is night or dark, the camera automatically detects the light
level and maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
● RETURN : Select this to save the changes in the EXPOSURE menu and return to
the SETUP menu.
• When you use a DC lens, set the shutter mode to --- if color rolling occurs.
• When the SHUTTER is set to ESC after selecting the Internal Synchronization
Type, the picture may become unstable if the camera faces a bright fluorescent
light. Therefore, take care when choosing the installation position.
• If you set the Function Setup button to ‘AUTO’ mode, You can adjust the
brightness by increasing or decreasing the shutter speed. (x2 ~ x512)
• Note that the higher the zoom level, the brighter the screen, but the more likely it
is that an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the zoom level is increased, this is normal.
EXPOSURE SETUP
▶
1.BRIGHTNESS
IIIII

IIIIIIIIIIIIIIII
25
2.SHUTTER ESC
3.AGC HIGH
4.SENS-UP AUTO
5.RETURN
Joystick so that the arrow indicates 'EXPOSURE'.
Joystick.