Dynamic CCTV DTV-VLDpro-W6, User Manual

Page: 26 / 40

24 24
Vandal Resistant Dome Camera
• You cannot set the DNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE menu is 'OFF'.
• When adjusting the noise reduction level of the DNR3 mode, remember that the higher the level
set, the more the noise level will be reduced but that after image may also occur.
This function reduces the background noise in a low luminance
environments.
1. When the SETUP menu screen is displayed, select 'DNR3'
by using the Joystick so that the arrow indicates 'DNR3' .
2. Select a desired mode using the Function Setup switch.
- OFF : Deactivates DNR3 so that noise is not reduced.
- ON : Activates DNR3 so that noise is reduced.
3. Set the DNR3 mode to 'ON' and press the Joystick.
Then you can adjust the noise reduction level.
DNR3
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.SSDR
ATW 4.WHITH BAL
OFF 5.BACKLIGHT
ON 6.DNR3
▶
DNR3
LEVEL
IIIIIIII

IIIIIIIIIIIII
15
Press SET to Return