DYNALINK® S 8862A 9” LCD Digital Portable Television With HD Tuner
Page 8
8. DTV MAIN OPERATION
By pressing the MENU button on the Top Panel or the remote control, while in DTV mode, the user is presented on
screen with several menu options: ‘PROGRAM’, ‘PICTURE’, ‘CHANNEL SEARCH’, ‘TIME’, ‘OPTION’, ‘SYSTEM’,
‘USB’.
The following section maps out the menus and the parameters that can be changed.
8.1 Program Menu
Program Edit: The user must enter the password for this feature to function. The password is 888888.
[Show Program Edit screenshot somewhere here]
This feature allows a user to edit the program channels. The four coloured buttons on the remote control function
in this mode as follows (there are prompts on the screen for this):
• Red = Move channel up or down the list,
• Green = Skip channel,
• Yellow = Lock channel,
• Blue = Delete channel from the list,
FAV: Mark channels as FAVOURITES under five categories. Movies, News, Sport, Music, Disable.
EPG: Electronic Program Guide. See Section 10 of this manual for a description on how to operate the PVR..
SORT: Sorts the channel listing by various parameters: ‘LCN’ (default), ‘ONID’, ‘Service Name’, ‘Service ID’, which
are selected using the cursor buttons.
LCN: Logical Channel Number. Use the left / right cursor to select ‘ON’ or ‘OFF’.
8.2 Picture
Aspect Ratio: Use cursor to select: 16:9 Wide Screen (default), 4:3 Full, 4:3 Pan & Scan, 4:3 Letterbox and confirm
by pressing OK button. Resolution: 1080i (default) and auto adjust to lower resolutions.
TV Format: Select either PAL or NTSC. PAL is suitable for Australian TV.
8.3 Channel Search
Autosearch: Use cursor to select this option and press OK. The TV will auto scan for channels, and add any new
channels found to the channels list.
Manual Search: This option allows manual channel tuning.
Some knowledge of the channel frequencies in use in your
area is required for this to be utilized effectively. ‘Autosearch’
is recommended.
Country: Choose the country in which you are located. This
should probably be done before ‘Autosearch’ or ‘Manual
Search’ functions. (Improper configuration may lead to signal
reception failure.)
Antenna Power: Switch it to ‘ON’ or ‘OFF’ (default setting). It
is unlikely that this will need to be on.
