DYNALINK® S 8862A 9” LCD Digital Portable Television With HD Tuner
Page 12
10.3 Timer Recording
Press the EPG button on the remote control or select EPG from the Program menu. Press INFO to open the
Booking List. Press the Red button to ADD a new booking for a recording event. Enter the required information
according to the Event menu displayed and press OK to confirm the booking, or Exit to cancel it.
Once the details have been programmed, the event will be added to the Booking list, which can be viewed by
pressing INFO button. The Booking list may be edited as needed, adding new programs, deleting bookings,
changing the times of bookings etc. using the coloured buttons on the remote control.
11. SOFTWARE UPDATE VIA USB INTERFACE
From time to time, the manufacturer might upgrade the operating software for the TV tuner, in order to improve
functions and/ or fix bugs. The software upgrade file itself would need to be downloaded from a website and
stored in the root directory of the USB Flash drive. Contact the retailer for information about where to get the
software. Then follow these steps:
1.
Plug the USB drive carrying the update file in the root directory into the USB interface of the receiver.
2.
Press MENU. Choose the ‘SYSTEM’ sub-menu, select ‘Software Update’ and press to start upgrade process.
While the upgrade progresses, the LCD will show the percentage completed. At 100%, the update will be
finished, and you can remove the USB flash drive as instructed.
3.
The receiver should reboot at the conclusion of the software install. To ensure that the upgrade has been
successful, please do not remove the USB drive from the receiver and /or power off the receiver during the
process.
