DYNALINK® S 8861B 7” LCD Digital Portable Television With HD Tuner
Page 11
Page 6
8. DESCRIPTION OF REMOTE CONTROL BUTTONS
Some functions here listed are described in Section 4
1. STANDBY power: On / Off button
2. MODE: Press to switch between DTV/AV
3. SEARCH: Press and hold button to commence automatic
search for TV channels
4. MUTE: Turn audio off and on.
5. “0 - 9”: Enter number(s) corresponding to TV channel.
6.
₪
: Return button – go back one operation or step within
a menu. Also switches between two channels in DTV
modes.
7. FAV: Use to call up favourite channels in DTV mode (see
Section 9).
8. EPG: Press to display electronic program guide (only
available under DTV mode). Use EPG to set up PVR
recording functions using a USB stick for program
storage.
9. LIST: In DTV mode, recalls the TV program list on
screen. Use up or down cursor to scroll.
10. INFO: Press to display channel and program
information while watching TV shows.
11. OK: Confirm / Select.
12. CH+/
▲
: Channel selection/ cursor up.
13. CH-/
▼
: Channel selection/ cursor down.
14. VOL+/
►
: Volume up/ cursor right.
15. VOL-/
◄
: Volume down/ cursor left.
16. AUDIO: Sound track switch for audio language and mono or stereo listening.
17. MENU: Press to open main OSD menus.
18. TV/RADIO: Press this button to switch between TV and Radio channels in DTV mode.
19. EXIT: Press to cancel a function or exit current sub-menu and return to main menu or TV viewing.
20. "RED","GREEN", "YELLOW", "BLUE": Corresponding menu function (see Section 9).
21. P. ADJ: Picture adjustment only activates these functions in DTV mode and during USB playback – ‘BRIGHT’,
‘CONTRAST’, ‘COLOUR’, ‘UP/DOWN’, ‘MIRROR’, ‘16:9’, ‘RESET’. Use the left or right cursor to adjust these
picture settings.
22. PICT: Picture mode - press for "STANDARD", "SOFT", "VIVID", "LIGHT", "PERSONAL".
23. SUBTITLE: Press to turn ON/OFF the available multilingual subtitles.
24. SLEEP: Selecting the switch-off timer up to 120 minutes.
25. <<: Fast Rewind. Note: These transport controls are used during USB playback operations for music, photos,
movies, PVR recordings (see Section 10).
26. >>: Fast Forward.
27. TEXT: Activate Teletext feature if transmitted by that station. Use cursor controls to scroll up or down text pages.
Press button again to turn Teletext off.
28.
●
: Record to USB stick from a DTV program.
29. |<: Previous Track.
30. >|: Next Track.
31.
■
: Stop playback.
32.
►║
: Play/Pause button.
1
2 3
6
4
5
7
9
10
20
16
21
29
8
18
11 to 15
17
19
22
23
24
25
26
27
28
30 31 32
Problem
Possible Causes
No Picture, No Sound
Check to see that the AC adapter or Car adapter is properly
connected. Do not use an unauthorized power supply pack.
Check to see if the TV set is on standby status.
No image
Depending on location, it may be necessary to rescan for
available TV channels in that area. Check antenna. If using
telescopic antenna, change to external antenna.
No sound
Check the volume setting and verify that the earphones are
plugged in properly. Check the audio system settings in AV
mode.
Dark picture
Adjust the brightness and / or contrast settings. Low
temperatures can affect the screen.
Unclear or unstable image
Weak TV signal – adjust antenna orientation or move to
another location inside or outside the building.
Snow or hazy image
Interference due to the operation of electric motors nearby,
passing trains, high voltage lines or neon lights.
Upside down or inverted picture
Upside down or inverted picture Improperly adjusted horizon-
tal or vertical screen tracking control. Check settings under
‘P. ADJ’.
Signal Search Failure
Check Country and region settings
Pixelated image Intermittent weak signal.
Check antenna.
No Signal Message
Receiver cannot detect a signal for that channel.
Check antenna.
No Information message.
Station program information is not being decoded or there is
no program info to display.
13. TROUBLESHOOTING
DYNALINK® S 8861B 7” LCD Digital Portable Television With HD Tuner
