DYNALINK® S 8861B 7” LCD Digital Portable Television With HD Tuner
DYNALINK® S 8861B 7” LCD Digital Portable Television With HD Tuner
Page 9
Page 8
9.5 Option
OSD Language: Use the cursor controls to choose the language of the menus and functions for On Screen Display.
English is default.
Subtitle Language: Choose the language in which subtitles appear during TV broadcasts where available. Default
setting is ‘OFF’ and there are about 20 languages to choose from.
Audio Language: Choose from a range of languages in which to hear your TV broadcasts. Default is English.
(Configure according to the language supported by the signal).
9.6 System
Parental Guidance: Use the cursor to select this option and set an age limit on what programs can be accessed
from the TV. A six digit password is required to activate the parameter, and once entered, you can set the age from
4 to 18. Factory default password is ‘888888’. Default setting is ‘OFF’. Make your choice and press OK to confirm.
Set Password: Use this to set or change the password number for access to the primary TV functions and to alter
the Parental lock setting. Factory default password is ‘888888’. Input the old password and then a modified
password and confirm the new one. Please remember the password you have entered.
Restore Factory Default: This will delete all stored channel frequencies from the TV memory and place all
parameters back to the factory original settings, including the password. Use the cursor controls to select this
option and press OK. To proceed with the reset, press OK again, otherwise press EXIT.
Information: Details of the Model, SW Version, and HW Version for this TV.
Software Update: Install new software via USB stick. See Section 12 for more detail.
10. USB FLASH DRIVE:
This TV, via the USB socket, is able to read and play many different file formats, as summarised in the chart below.
Supports JPEG, BMP and PNG photos. Supports WMA, MP3 and M4A audio files. Supports AVI, MPG and DAT
video files.
It does not support DIVX3 video format and AC3 audio compressed format. The device has been successfully
tested using a 4GB USB stick.
Note: This TV is able to play video from media that streams at or below 1000KBP/S. It might pause when the data
stream is above 1000KBP/S. The USB socket of this device does not support multi-media devices such as card
readers, portable hard drives, MP3 / MP4 players. It is designed for USB flash memory drives only. If the USB
does not work properly when inserted into the appropriate slot, remove it and try again a few seconds later.
10.1 Multimedia
Use the cursor to select this parameter and press OK. You will enter the USB playback options menu consisting of:
‘Music’, ‘Photo’, ‘Movie’, ‘PVR’. Use the cursor to scroll and choose a function and then press OK to activate.
• The menu screen includes On-Screen Display (OSD) prompts on the bottom of the page to make navigating
sub-menus easier.
• When playing movies or music, and you press transport control buttons like >>, the control icon will activate in
the display window and the track will Fast-forward 2x; press again to get 4x, and press again and again to get up to
32x FF speed. The same is true with << Rewind. Press the same button again (after 32X) or press Play
►
to
revert instantly to normal speed playback.
• In Photo playback mode, press the PLAY
►
or OK button to start a slide show presentation of all the photos
listed in the left column.
• In Movie playback mode, once a video file has commenced playback, press the blue button on the remote
control to see the video in Full Screen mode, press again to revert to Preview mode.
• In Photo and Movie playback full screen modes, press the INFO button on the remote control to display a
window on screen stating the essential track information.
• PVR mode will allow you to select and play supported format video, or delete or rename these recorded video
files stored on the USB.
10.2 Photo Configure:
Allows you to set parameters controlling the slide show presentation in ‘Photo’ playback mode under the
‘Multimedia’ submenu.
• Slide Time: from 15 seconds to 85 seconds (default 25 seconds) per slide.
• Slide Mode: ‘Random’ (default) transition styles, or a choice of 59 unique transition styles. ‘Random’ will
randomize the transitions from one slide to the next among all 59 styles, making for a more interesting slide
presentation.
• Aspect Ratio: ‘Keep’ aspect ratio of slide photo (default) or ‘Discard’ aspect ratio, which means the photos will
be forced to fit the screen aspect ratio. This could result in a highly distorted image.
10.3 Movie Configure:
Allows you to set parameters controlling the Movie playback under the ‘Multimedia’ submenu.
• Aspect Ratio: ‘Discard’ (default) or ‘Keep’
• Subtitle Specific: Sets the size of the subtitle font that appears on the bottom edge of every movie during
playback. This subtitle carries information about the playback, such as time elapsed etc. Sizes range from
‘NORMAL’ (default), ‘BIG’, ‘SMALL’.
• Subtitle Background: Background colours for subtitle text include: ‘Transparent’ (default), ‘Grey’, ‘YellowGreen’,
‘White’.
• Subtitle FontColor: Actual colour of the subtitle text, including: Red, Blue, Green, White, Black.
10.4 PVR Configure:
Allows you to set parameters controlling the PVR function, both for recording and playback under the ‘Multimedia’
submenu.
• Record Device: Tells the type of media format how much memory capacity is used up and how much recording
space remains on the inserted USB flash drive.
• Format: Use the cursor controls to select this option to format the inserted USB stick. Choose the format type –
FAT 32 recommended. Remember that formatting the USB drive will remove all data currently stored on it.