DYNALINK® S 8861B 7” LCD Digital Portable Television With HD Tuner
DYNALINK® S 8861B 7” LCD Digital Portable Television With HD Tuner
Page 12
Page 5
5. CONNECTION OF MAIN INTERFACES
5.1 Connection of Power Supply:
Connect the AC power adaptor or the car adaptor to the DC input on the TV unit (see Fig. 1).
5.2 Connection of Antenna cable:
An external PAL socket is provided (number 2, on Fig. 1) for connection to an external antenna. Remove the in-built
telescopic TV antenna to reveal the PAL socket into which the TV antenna cable can be plugged. The other
supplied external antennas can also be connected to this PAL socket for improved signal reception.
5.3 Connection of AV conversion cable:
This portable TV comes with a composite audio-visual cable adapter that can connect to the AV Input socket. Plug
the AV conversion cord into AV/IN jack on the TV. Then plug the RCA jacks into the corresponding colour output
sockets on the output device (i.e. source such as a DVD player).
6. BATTERY OPERATION
This portable television set is fitted with an internal rechargeable battery that is not removable. Whenever the TV is
connected to either the AC power adapter or the car lighter adapter, the battery will commence charging, even
while the TV is operating. A full charge will be reached within a few hours and will provide about two hours or at
most three hours of continuous operation (depending on screen brightness settings).
When ‘BATTERY’ flashes in red letters in the top left corner of the screen, the TV has about five minutes more of
operation before shutting down. When this icon appears on the screen, connect the TV to an external power source
if available.
To protect the internal battery, please never overcharge any fully charged battery.
It is normal for the battery to get hot after charging. But if the temperature reaches over 60 degrees C while
charging, something is wrong with the battery. Please remove the power adapter and take the unit to an Altronics
service centre for a professional check.
If the battery is charged under high temperature conditions, it will not be charged fully. Suggest charging it
between 15-25 degrees C ambient temperature for the best result.
For long periods of not using the device (over 3 months in storage), please fully charge and discharge the battery
at least three times to preserve the battery life.
7. FIRST TIME SET UP
After your device is connected to a power supply and
switched on for the first time after purchase, the will
implement an installation protocol. The following three
options will appear:
OSD LANGUAGE (English is default)
COUNTRY (Set according to you location). Improper
configuration may lead to signal reception failure.
CHANNEL SEARCH
After choosing the language and country settings using the cursor arrow buttons, select ‘CHANNEL SEARCH’ and
press OK. The TV will automatically scan through the channel frequencies and store the working channels in
memory. Once the digital stations have been stored into memory, you can commence viewing the TV programs of
your choosing.
NOTE: This same process will be initiated after a user activates a factory reset, which will clear all stored channels
and other settings. If the television has no channels stored, it will engage the Auto Search protocol.
14. SPECIFICATIONS
LCD Screen
LCD screen size:
7'' TFT LCD (17.8cm) 16:9 ratio
Response time:
R:10/ F:20 milliseconds
Contrast ratio:
300:1
Resolution:
800(H) X 3(RGB) X 480(V)
Viewing angle:
U: 40/D: 60 R/L: 60
Brightness:
200cd/m2
Illumination:
LED
DVB-T System
Input frequency:
VHF - 177.5MHz - 226.5MHz; UHF - 474MHz - 858MHz
Input Voltage:
-80dbm to -20dbm
Input Resistance:
75 Ohm
Input code rate:
4.98 -31.67 Mbit/s (8MHz band width)
COFDM
Modulation:
QPSK, 16-QAM, 64-QAM, 256-QAM
Bandwidth:
7MHz & 8MHz (7MHz default)
FFT mode:
2K/8K
Decode Standard
Video standard:
MPEG1, MPEG4, SP+ASP@L5D, DiVX13, 114, x6, x, Home Theatre and HD Profile
HD: 1080I:
JPEG (support 422/411/420/444/440 format)
Input code rate:
Max 60Mbit/s
Audio standard of decode:
MPEG 2, MP3, WMA, AAC-LC, MPEG1, HE-AAC
Audio output mode:
Stereo, double sound track (left and right)
USB Media
Flash media:
NFTS or FAT32, USB 2.0 or earlier
Audio:
WMA, MP3, M4A
Video:
AVI, MPG, DAT
Picture:
JPEG, BMP, PNG
Record function:
PVR record (Can record from EPG)
General
OSD language:
English, German, French, Italian, Spanish, Portuguese etc.
Audio output:
Speaker output: 0.5W×2, Earphone output < 15mW
Video Input:
1.0mVp-p 75 ohm (with AV converter cable)
Picture display mode:
4:3/16:9 Aspect ratio
Connections:
External antenna input jack, headphone jack, audio/video (AV) input and output, external power input jack
Speakers:
2 x 27mmØ
Internal battery:
7.4V/2000mAh, Up to twohours usage fully charged, depending on screen settings
Car power adaptor:
DC+12V
AC adaptor: DC Output:
12V/1.5A
Power consumption:
≈
10W
Operating temperature:
0 - 40°C
Unit dimensions:
205mm L x 117mm W x 36mm D
Weight:
450g including Battery
