Dynalco UM-600, Installation And Operation Manual, Page: 7 / 13

6
Programming Overview
All programming is accomplished through the front keypad. Below is a brief description
of each key.
Press to enter or exit the configuration screens
Press to enter or accept values
Increases values
Decreases values
Goes back one screen
Advances to next screen
Configuration consists of the following steps:
1) Setting current date / time
2) Enabling each input
3) Defining each input type
4) Defining min. & max. display values for any current or voltage inputs
5) Defining measurement display units (PSI, mV, F, C, H20, etc)
6) Setting over / under setpoint trips
7) Selecting either output 1 or output 2 (or both) for alarm trips
8) Setting either latching or non-latching for output trips