Dynafit NEO, User Instructions

Page: 3 / 19

THANK YOU FOR CHOOSING DYNAFIT SKI BOOTS!!
DYNAFIT ski boots are engineered and produced to meet the highest industry standards
in both performance and quality. With the quality of materials used and the dynamic
performance-oriented functions, every boot is specifically designed to cater to the needs
of an AT skier. Within our collection you will surely find the right boot to satisfy your
backcountry needs. For your own safety and knowledge, we ask that you please read and
review the following user manual.
ATTENTION ALL USERS!
PLEASE RECOGNIZE THAT SKIING, AMONG MANY OTHER OUTDOOR ACTIVITIES, CAN
BE DANGEROUS. PLEASE BE AWARE AND EXERCISE CAUTION.
For your safety we recommend that you replace the shells of your boots (regardless of
brand) after approximately 4 years. Please keep in mind that depending on use, care,
and treatment of your boots, this time span may vary.
INSTRUCTIONS FOR USE
NOTE: For any questions regarding or relating to the proper fitting or use of the boots,
please consult an authorized DYNAFIT dealer.
BUCKLE ADJUSTMENT: The NEO PU boots offer a revolutionary patented cuff buckle
system that, with only a single movement, allows the boot to switch from released/walk
mode to locked/downhill mode.
• CENTRAL BUCKLE: The central shell buckle offers 4 different adjustment positions
by moving the cable loop on the 4 available hooks. Open and close the plastic cover
to allow access to the hooks. Adjust the buckle in a way that keeps your feet in place
and avoids heel slippage. The buckle is not meant to be opened, closed, or adjusted
between uphill or downhill phase. If needed the buckle has a micro adjustable screw
for precise fitting, make sure that the white “ + \ - “ are on the upper (visible) side.
• UPPER BUCKLE: The upper cuff buckles offers 4 different adjustment positions by
moving the cable loop on the 4 available hooks. Open and close the plastic cover to
allow access to the hooks. The adjustment should be enough to securely close the cuff
around your lower leg for downhill ski mode. In case the 4 hook positions are not able
to provide an accurate fit, you can move the buckle catches forward or backward by
simply removing the screw on the back, repositioning the buckle catches on a different
hole, and securing them again with the original screw.
engli
sh