25
HOW TO REPLACE FORWARD-REVERSE SHIFT LEVER
1. Unscrew the two screws on the seat and remove the seat.
2. Unscrew four 4x12 round head screws as shown to remove the Forward-Reverse
Shifter Assembly from the ride-on toy body (diagram A).
3. Unplug the switch sockets from the Forward-Reverse switches (diagram B).
4. Use a flat head screwdriver to pry off the shift lever cover, and then unscrew the
4x16 mm flat head screw and remove the shift lever (diagram C).
5. Unscrew the 4 4x16 mm flat head screws and remove the shift lever assembly.
6. Replace the shift lever assembly with a new one, securing it with the 4 4x16 mm
flat head screws. Reattach the shift
lever using the 4x16 mm flat head screw
and snap the shift lever cover back into
place. Reconnect the switch sockets
with the Forward-Reverse Switches,
and reverse steps 1 and 2, above, to
finish reinstalling the shift lever.
4x16 Flat
Head Screw
Cover
4x16 Flat
Head Screw
Shift Lever
Assembly
A
B
C
NOTE: Ensure the black switch socket plugs into
the black switch and the white switch socket
plugs into the white switch. Failure to properly
connect the plugs will result in the forward and
backward directions being reversed.
Shift Lever
High
Low
Backward