background image

LIMITED WARRANTY

This Limited Warranty (“Warranty”) extends only to the original retail purchaser, who must provide 

proof of purchase to validate any claim  As noted below, certain aspects of this Warranty can be 

extended free of charge to original retailer purchasers who also register their product using the 

provided online registration form  Proper registration via Dynacraft’s online registration form is the 

only way to obtain these noted extensions  This Warranty is not transferable to anyone else and 

is the only warranty for your Dynacraft product, to the extent permitted by law  No other express 

or implied warranty is given, and except to the extent prohibited by applicable law, any implied 

warranty of merchantability or fitness for a particular purpose on this product is hereby disclaimed  

Part or model specifications are subject to change without notice  By purchasing and using your 

new electric ride-on toy you agree to be bound by the terms of this Warranty as set out below  This 

Warranty is subject to change without notice 

What does this Limited Warranty cover?

 This Warranty covers all parts of the electric ride-on toy 

to be free from defects in workmanship and materials  This Warranty is only effective if: the electric 

ride-on toy is used under normal conditions for its intended purposes, by a person that properly 

fits and is capable of controlling the vehicle; and the electric ride-on toy receives all necessary 

maintenance and adjustments 

What is not covered by this Limited Warranty?

 This Warranty does not include labor and 

transportation charges  You, the original purchaser will be responsible for labor or transportation charges 

associated with the repair or replacement of any parts found to be eligible for warranty coverage  

Those original purchasers who qualify for the extended version of this Warranty will have transportation 

charges waived for the duration of the Limited Warranty period  This warranty does not cover damage 

caused by normal wear and tear, crash collision, misuse, abuse, neglect, improper assembly, improper 

maintenance, lack of maintenance, alteration, or any similar damage to the ride-on toy 
This Warranty will be void if the electric ride-on toy is ever: installed with a motor or modified in any 

other way; rented or used for commercial purposes; or used in a manner contrary to the instructions 

in the Owner’s Manual included with this product  Dynacraft will not be liable for incidental or 

consequential loss or damage, due directly or indirectly from use of this product 

For how long does this Limited Warranty last

? The ride-on toy, with the exception of the battery 

and cosmetic parts as described below, is warrantied against defective materials or workmanship 

for a period of one year from the original date of purchase 
The battery is warrantied against defective materials or workmanship for a period of six months 

from the original date of purchase  For those original purchasers who qualify for the extended 

version of this Warranty, the battery is warrantied for a period of one year from date of purchase 
Parts and accessories considered to be cosmetic and not essential for the operation of this electric 

ride-on toy as well as those parts and accessories subject to normal wear and tear are warrantied 

against defective materials or workmanship for a period of 30 days from the original date of 

purchase  An original receipt confirming the original date of purchase is required to validate your 

warranty  For those original purchasers who qualify for the extended version of this Warranty, 

cosmetic/wear-and-tear components are covered for 90 days from date of purchase  Parts and 

accessories considered cosmetic include, but are not limited to: mirrors; doors; fenders; stickers/

decals; decorations/accessories; and fur Coverings (for plush animal electric ride on toys)  Parts and 

accessories subject to wear and tear include, but are not limited to wheels and wheel components 

What will Dynacraft do to honor this Limited Warranty?

 Dynacraft will replace any component or 

battery confirmed to be defective and eligible for warranty replacement with the same or a functionally 

equivalent part  You, the original purchaser will be responsible for any and all labor or transportation 

charges connected with the replacement or repair of the ride-on toy or any covered parts 

How do you make a claim under this Limited Warranty?

 Warranty claims should be 

submitted via Dynacraft’s online portal at dynacraftwheels com/contact  Please have your proof 

of purchase available before contacting to validate your claim  Products can be registered at 

dynacraftwheels com/register 

Summary of Contents for Realtree



































Reviews: