13
10. RACK ASSEMBLY
INSTALLATION
• Insert the Front and Rear rack supports
into the four corresponding holes in the
ride-on toy body as shown in diagram 1.
• Secure each of the Front Rack Supports
using one 4x16 mm round head screw on
each side, as shown in diagram 2.
• Secure each of the Rear Rack Supports
using two 4x16 mm round head screws on
each side, as shown in diagram 3.
Rear Rack
Support
Front Rack
Support
9. RACK REAR SUPPORTS
ASSEMBLY
• Find one Rear Support marked with an
“R2” and remove the M5x30 machine
screw and M5 locknut from it.
• Attach the support to the corresponding
U shaped support also marked with an
“R2”. Reinsert the M5x30 machine screw
as shown, and tighten it with M5 locknut
securely, as shown at right.
• Find the other Rear Support marked with
an “L2” and remove the M5x30 machine
screw and M5 locknut from it.
• Attach the support to the corresponding U
shaped support also marked with an “L2”.
Reinsert the M5x30 machine screw, and
tighten it with M5 locknut securely.
Rear Rack Support
M5x30 Machine
Screw
M5 Locknut
1
2
3
4x16 Round
Head Screw
4x16 Round
Head Screw
R2
L2
R2
L2
