Installation
This device has been designed to be installed horizontally in a conventional 19” rack cabinet.
In general, an installation location must be selected in which the device is protected from the
following conditions:
•
Dripping water or spray
•
Direct sunlight
•
High ambient temperatures or direct effect of sources of heat
•
High level of humidity
•
Heavy dust accumulation
•
Strong vibrations
Front attachment of the device
Refer to the following illustration to attach the front of the device, using four screws and
washers. Because of painted surfaces the connection of the grounding screw at the rear panel
of the device is recommended.
Figure 5.1: Installation of the device into a 19" rack
!
Caution!
The use of rack mount rails is recommended when installing the device in a rack shelf or rack
cabinet to prevent the front panel from twisting or warping. If devices should be stacked in
the rack (e.g. using the self-adhesive foot stands supplied) the maximum permissible load of
the mount rails must be considered. Please refer to the technical specifications provided by
the rack rail manufacturer.
5
14
en | Installation
Promatrix 6000 Amplifier
18-Jun-2015 | 04 | F01U306848
Operation manual
