PROUDLY DESIGNED, ENGINEERED, AND BUILT IN AMERICA SINCE 1969
Dynabrade, Inc.
8989 Sheridan Drive
|
Clarence, New York 14031
|
dynabrade.com
57. Accessories may be stored
in the accessory caddy
(not
standard)
. The hose may be
stored in the hose holder
(not
standard)
. To do this, place
one end of the hose between
the hose holder posts and the
tank cover. Wrap the hose
around the tank cover keeping the hose tucked between
the posts and the cover.
FIGURE 38.
The vacuum
should be stored indoors.
LUBRICATION
STORAGE
FIGURE 37
FIGURE 38
55. No lubrication is necessary as the motor is equipped
with lifetime lubricated bearings.
56. Before storing your vacuum
cleaner the tank should be
emptied and cleaned. The
power cord can be wrapped
around the cord wraps provided
on the tank cover on rear of
unit.
FIGURE 37
.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Loss of suction
wet pick up
Loss of suction
dry pick up
Loss of suction or
misting during wet
pick up
Clogged filter
Clogged filter
Full tank
Full tank
Saturated filter
Clean filter, see steps 29-33 on page 7, and steps 49-52
on page 9.
Clean filter, see steps 29-33 on page 7.
Drain and clean tank, see step 54 on page 9.
Clean filter, see steps 45 on page 8.
Empty and clean tank.
BEFORE DOING ANY WORK ON YOUR VACUUM, TURN THE UNIT OFF AND DISCONNECT THE PLUG
FROM THE WALL OUTLET.
Full tank
Empty tank, see step 54 on pg 9.
Full disposable filter bag
Remove bag or replace with new.
PAGE 11
damage to the motor. To continue use, empty the liquid
waste from the tank as outlined in the previous
section.
NOTE:
IF ACCIDENTALLY TIPPED OVER, THE
VACUUM COULD LOSE SUCTION. IF THIS OCCURS,
TURN UNIT OFF AND PLACE VAC IN UPRIGHT
POSITION. THIS WILL ALLOW THE FLOAT TO RETURN
TO ITS NORMAL POSITION, AND YOU WILL BE ABLE
TO CONTINUE OPERATION.
Summary of Contents for Mini-Raptor Vac 61100
Page 14: ......
