Metal Capture Station Maintenance Guide
8
To change water:
Remove cap from drain valve and connect
a garden hose, open valve and remove all
water from tank.
When tank is completely empty of water,
remove garden hose, re-install cap on
drain valve and lock valve in the closed
position.
After draining all water, remove the sludge
with a non-sparking scoop.
Adhere to local codes to properly dispose
contaminated liquids/sludge.
Hose clean and re-install mist traps back
into machine and lock down access panel.
Keeping the liquid level sensors clean
from sludge and debris is very important in
maintaining the machines proper water
level both in “On” and “Off” mode. Located
in the wall of the tank as shown, gently
clean the black sensor faces with water of
any grind build-up or foreign debris.
These sensors should be monitored and
kept clean through the usage of the
machine on a daily basis.
Follow the Machine Setup for
re-filling your machine and start-up.
4
5
6