Dymo LabelPoint 250, User Manual

Page: 7 / 40

7
A label can be underlined or enclosed in a box, but not
both together.
To add an underline or box style
1. Press the
>
key.
2. Select underline or a box style and press .
On multi-line labels, both lines are underlined. In box
style mode, all the lines are enclosed in one box style.
Creating Multiple-Line Labels
You can print a maximum of two lines on
3/8" (9 mm) and 1/2" (12 mm) labels.
To create a multiple-line label
1. Type the text for the first line, and press . A new
line character is displayed at the end of the first
line, but will not print on the label.
2. Type the text for the second line.
Using Mixed Formats
You can apply different fonts and format styles to the
text on a label by inserting format breaks to divide the
label into blocks or sections of text. You can add two
format breaks allowing you to apply three separate
formats per label.
Alignment, underline, and box styles cannot be
mixed on a label. These styles are common to the
entire label.
To add a format break
1. Enter and format text for the first section.
2. Press .
3. Select
Format Break and press . A new
section character is displayed at the end of the
first section, but will not print on the label.
4. Continue entering and formatting text for the next
section of the label.
Using Tabs
You can add tabs to a label to align text on multi-line
labels. Tabs are left justified and the default spacing is
2.0”(50 mm).
To change the tab spacing
1. Press .
2. Select
Set Tab Length and press .
3. Use the up and down arrow keys to increase or
decrease the tab setting, and then press .
To insert a tab
1. Enter your text.
2. Press
and select Insert Tab .
3. Press and continue entering text.
Using Symbols and
Special Characters
Symbols and other special characters can be added to
your labels.
Figure 10
!