8
USE R GUI DE
|
P OR T A -R AY
®
4 0 0 R
Figure 4.
PORTA-RAY 400R (Open & Closed)
(PN 39639, PN 39640, PN 39697, PN 39713)
Figure 5.
PORTA-RAY 400R Lamp Head Mounting-Hole
Dimensions (inches)
Assembly and Setup
Unpacking and Inspecting Your Shipment
When your PORTA-RAY arrives, inspect the boxes for damage
and notify the shipper of any box damage immediately.
Open each box and check for equipment damage. If parts are
damaged, notify the shipper and submit a claim for the
damaged parts. Contact Dymax so that new parts can be
shipped to you immediately.
Check that the parts included in your order match those listed
below. If parts are missing, contact your local Dymax
representative or Dymax Customer Support to resolve the
problem.
Parts Included
•
PORTA-RAY 400R lamp head with attached bottom
accessory compartment
•
400-Watt UVA-enhanced arc bulb (installed) - other
spectral versions optional
•
Lamp headrest/mini curing chamber with drawer
•
UV/IR protective glasses
•
AC power cord
•
PORTA-RAY 400R Use Guide
•
Face shield
Mounting
The lamp head should always be placed on the headrest or
held away from any flammable surfaces. Never place the lamp
head directly on the work surface. The PORTA-RAY 400R is
also designed to be machine or conveyor mounted using the
two threaded holes in the top surface of the lamp head.
The lamp head can also be placed on a shelf-type structure, supporting
the unit by its bottom outside edges. For this type of mounting, a
windowed hole must be cut in the shelf to provide adequate clearance
for the unit’s bottom
-side light exposure opening, and also for the
cooling air-exhaust holes.
