dymax Edge-Carry, User Manual, Page: 9 / 32

9 Dymax Edge-Carry Conveyor User Guide
Electrical Specifications
Table 1. Electrical Requirements
Property Specification
Conveyor Voltage
Requirements
115 or 220 VAC, 50 or 60 HZ
Conveyor Current
Requirements
See Table 5
Lamp/Power Supply Input
Voltage
100-240 VAC (continuous) Dymax lamp systems
208-240 VAC Fusion lamp systems
Input Current See Table 6 for individual model numbers
Conveyor & Lamp Total Input
Current
See Table 7
Physical Specifications
Table 2. Physical Requirements
Property Specification
Model* UVCS Edge Carry
Cure Width Up to 12 inches (305 mm)
Number of Lamps
One Dymax 1200-EC or 2000-EC lamps; Up to four Dymax 5000-EC lamps
Up to two Fusion F300 series lamps
Motor Drive Direct
Chain Speed 1.0 – 32.0 FPM (0.304 – 9.73 m/min.)
Chain Speed (Special Order) 0.5 FPM – 32 FPM (0.15 – 9.73 m/min)
Chain Speed Display Red digits, 1 decimal place
Lamp Focus Adjustment 4.0" - 7.5" (102 -191 mm)
Maximum Part Height 6 inches ( 152 mm)**
Exhaust System 1 integral centrifugal blower
*Sixteen different configurations of conveyor are available. Table 3 and Table 4 show all of the possible choices.
** Larger part heights are achievable with the installation of optional riser kits.
The Edge-Carry Conveyor has an adjustable chain width. Different lamp installations can irradiate between 6"
and 12" of that width.