4
Dymax BlueWave® LED DX-1000 VisiCure® User Guide
Introduction
Introduction to the User Guide
This guide describes how to assemble, use, and maintain the Dymax BlueWave® LED DX-1000 VisiCure® Small-
Area LED Light Source safely and efficiently.
Intended Audience
Dymax prepared this user guide for experienced process engineers, technicians, and manufacturing personnel.
If you are new to high-intensity LED light-curing systems and do not understand the instructions, contact
Dymax Application Engineering to answer your questions before using the equipment.
Where to Get Help
Dymax Customer Support and Application Engineering teams are available in the United States, Monday
through Friday, from 8:00 a.m. to 5:30 p.m. Eastern Standard Time. You can also email Dymax at
. Contact information for additional Dymax locations can be found on the back cover of this
user guide.
Additional resources are available to ensure a trouble-free experience with our products:
◼
Detailed product information on
◼
Dymax adhesive Product Data Sheets (PDS) on our website
◼
Material Safety Data Sheets (MSDS) provided with shipments of Dymax adhesives
Safety
Before continuing with the installation, please read the following chapters of this manual for safety
recommendations and installation, operation, and troubleshooting instructions.
CAUTION!
Always wear protective goggles or face shield when working near the front of the
unit, which emits high-intensity visible light!
WARNING!
Always observe safety requirements!
CAUTION!
Risk of electrical shock if cover is removed!
To use a BlueWave LED VisiCure system safely, it must be set up and operated in accordance with the
instructions given by Dymax. Using the system in any other manner will impair the protection of the system.
Dymax assumes no liability for any changes that may impair the protection of the BlueWave LED VisiCure
system.
Safety Recommendations
■
Use the goggles provided or an approved face shield for eye/face protection.
