Page
7
Step
【
1
】
Installation of Desk Clamp
Using improper screws or screw size may damage your display. If spacers are required, be sure to
use screws of the correct size. Proper screws will easily and completely thread into the display
mounting holes. Inadequate thread engagement in the display may cause display to fall.
Note:
Other tools may be required depending on your method of installation.
Note:
It is recommended that the DE300S mount be clamped to the side edge or rear of the desktop
surface. The DE300S mount is suitable for square edged desk only. It is the installer’s responsibility to
make sure the desktop structure to which this product is attached can support the combined weight of
all components.
Installation to Desk
1. Adjust the height of the Desk Clamp
(2)
to suit desktop surface (
See Figure 1-1
).
2. Place the Plastic Gasket Cushions as shown (
See Figure 1-2
).
Figure 1-1
Figure 1-2
