Dyconn Butterfly Series, Instruction Manual

Page: 10 / 22

Page 10
Figure 1-10
Figure 1-8
Figure 1-9
7. Place the Plastic Gasket Cushions on the metal plate and base as shown ( See Figure 1-8 ).
8. Attach the Grommet Clamp Pole (2) to the edge of the desk in the desired position and ensure
that there is sufficient cabling in the desktop hole as shown ( See Figure 1-9 ).
9. Tighten by hand to ensure that the Grommet Clamp pressure plate is pressed flat onto the desk
surface and is secure ( See Figure 1-10 ).