Page
7
Figure 1-3
Figure 1-5
Figure 1-6
3. Place the Desk Clamp
(3)
on top of the desk in the desired position and ensure the
clamp opening is facing towards the edge of desktop.(
See Figure 1-3
) Turn and
tighten by hand to ensure that the Desk Clamp fully contacts to desktop surface and it
is secure in place. (
See Figure 1-4
)
4. You will need to loosen the Collar supplied. Position Collar at desired height and
orientation. Tighten by hand so the Collar assembly is firmly in place. (
See Figure
1-5
)
5. Place the DEK by inserting it down from the top to the pole, proceed to tread with
2.5mm Allen Wrench 2.5mm
(10)
supplied. (
See Figure 1-6
)
Figure 1-4