Page 12
Figure 4-1
Step
【
4
】
Cable Management
Ensure LCD Arm Assembly is fully extended before connecting cables.
Exercise caution when attaching or removing the display to avoid personal injury or
damage to equipment. Disconnect power before removing the display.
Note:
Ensure leave enough slack in the cables to allow for movement of the Arms.
Installing Cable Management
1. Connect cables to display monitor. Position the display at its highest position to ensure
that there is sufficient cabling at the end of the Arms so that the cables are not stretched
or pulled out when the display is moved. (
See Figure 4-1
)
2. Feed the cables by pushing the cables into cable bracket entry slot on the underside of
the Arms as shown. (
See Figure 4-2
)
Figure 4-2