Page 15
4. To increase or decrease the resistance of the Pivot Joint to suit display monitor swing
side to side, adjust the Tension Hex Cap Screw located on front side of the LCD Arm
to secure the position. (
See Figure 5-3
)
5. To increase the resistance, tighten the M5x15mm Tension Hex Socket Cap Screw
using Allen Wrench 4mm
(9)
supplied in a clockwise direction. To decrease the
resistance, loosen the M5x15mm Tension Hex Socket Cap Screw using Allen Wrench
4mm
(9)
supplied in an anti-clockwise direction.
6. This product is brilliantly engineered and is designed to adjust quickly and easily
according to your needs. To adjust the height, remove the Extension Arm from the
Pole. Loosen Collar, raise or lower the Collar on Pole, attaching the LCD Arm to
achieve your desired position. (
See Figure 5-4
) If this product tends to automatically
move to side, it may be required tension adjustment on the LCD Arm to suit your
display monitor arm swing to side position. This can be done by using Hex Allen
Wrench 2.5mm
(10)
supplied. (
See
Figure 5-5
)
Figure 5-3
Figure 5-4
