Page 14
Figure 5-2
Figure 5-1
Step
【
5
】
Adjusting the Display Monitor
Forced movement of the LCD Arm Assembly or Mount Bracket without loosening the
screws will damage LCD Arm Assembly or display monitor.
Exercise caution when adjusting the display, to support the display to avoid damage to
equipment. Disconnect power before removing the display.
Adjusting the LCD Arm Assembly Resistance
1. Product is brilliantly engineered to control the resistance in the Tilter Mount Bracket to
suit your display swing side to side of 90 degree and tilt forward and backward of 40
degree. It is possible to control the amount of resistance in the Tilter Mount Bracket to
suit your display monitor.
2. To support display monitor when adjusting resistance of the Desk Mount LCD Arm
Assembly. (
See Figure 5-1
)
3. Referring to the weight of the display monitor. If the Tilter Mount Bracket tends to
automatically fall, it may be required to adjust the Tilter Mount Bracket joint to suit your
display monitor tilt position of forward and backward of 40 degree. This can be done
by using Hex Allen Wrench 4mm
(9)
supplied, to increase the resistant of the Tilter
Mount Bracket in order to secure tilt position, adjust the M5x15mm Tension Hex
Socket Cap Screw located around the Tilter Mount Bracket Joint using the supplied
4mm Hex Allen Wrench. (
See Figure 5-2
)