background image

Manufacturer Limited Warranty

All Dyconn Faucet products are manufactured and tested with the highest quality standards and rigorous quality control process. This 

warranty is limited to the non-commercial use of Dyconn Faucet products purchased and installed in the United States and Canada. 

Dyconn Faucet Brand Limited Warranty on Faucets and Kitchen/Bath Accessories 

Dyconn Faucet warrants its faucet products to be free from manufacturing defects in material and workmanship during the normal 

non-commercial use for a period of (3) three years for all non-electrical component items and (1) one year for all electronic component 

related items (such as, but are not limited to, products like the sensor faucet and bidet toilet) from the initial purchase date by the original 

arrants its part and accessory products to be free from manufacturing 

defects in material and workmanship during the normal non-commercial use for a period of one (1) year from the initial purchase date by 

rranty is non-transferable between homes or owners and only applicable 

for residential use. Any commercial or industrial use of Dyconn Faucet products automatically void the warranty. Any warranty claim must 

include the original sales receipt as proof of purchase from an Authorized Dealer or Distributor of Dyconn Faucet products. 

(Authorized Dealers can be found on the Dyconn Faucet website). 

Dyconn Faucet recommends installation of all Dyconn Faucet products by licensed professionals. Dyconn Faucet will not be held 

responsible for any damages or product failure due to improper installation, misuse or the failure to adequately utilize a licensed 

professional. Proper care and maintenance for all products is s

ure 

proper function and a lasting product. Instructions are provided in your manual on the proper care and maintenance of Dyconn 

Faucet products. 

This warranty will not cover any damages that might be caused b

for such 

limitations, therefore, this may not apply to all owners). 

Any and all warranty claims must include the original sales receipt as proof of purchase from an Authorized Dealer or Distributor of 

Dyconn Faucet products. Please contact Dyconn Faucet Support or

Any 

product reported to Dyconn Faucet as defective will be repaired or replaced (with a product of equal value) at the company's discretion. 

If Dyconn Faucet is not able to replace or repair the product, Dyconn Faucet may elect to refund the original purchase price to the original 

purchaser in exchange for the product's return. Dyconn Faucet has full rights to inspect any Dyconn Faucet product reported as defective 

prior to repair or replacement. Any repair and replacement costs EXCLUDE shipping, labor for removal or re-installation, and any 

consequential or special damages associated with the return, replacement, and installation of your product. To ease the duration and 

ss the 

product's condition and determine the necessary replacement parts. Replacement parts and warranty claims may be obtained by 

contacting us using one of the following methods:

Phone: 1-855-239-2666 (in the U.S. and Canada)

Email: [email protected]  

Write to us:

Dyconn Faucet Warranty

382 N. Lemon Avenue #122 

Walnut, CA 91789 

Dyconn Faucet reserves the right to modify the warranty at any 

upersede 

warranty conditions that are applicable at the time of the original sale of products in question. 

 Dyconn Faucet makes no implication that products comply with any or 

all local building or plumbing codes. It is the consumer’s responsibility to determine any code compliances when installing and using 

Dyconn Faucet products.

Limitations of Warranty

The warranty shall not apply and be void for incorrect operatin

improper 

installation, carelessness, abuse, misuse, misapplication, improper maintenance and alteration of product; damages caused by chemicals, 

asualty. Avoid abrasive cleaners, materials, steel wools and harsh chemicals 

ation of 

chaser of the product. Dyconn Faucet neither installs nor supervises the 

installation nor hires contractors for this purpose; consequently, Dyconn Faucet cannot be held responsible for any default breakage, or 

damages caused thereby or resulting thereof, either directly or indirectly. 

This warranty does not apply to products that have not been installed or operated in accordance with instructions supplied by Dyconn 

Faucet and all applicable rules, regulations, and legislation pertaining to such installations. 

This warranty does not apply to commercial or industrial applications of Dyconn Faucet products. 

Dyconn Faucet is not responsible or liable for personal injuries or deaths to any person for any direct, special, incidental, or consequential 

 expenses, labor or material charges, or any other cost resulting from the 

use of the product or equipment or pertaining to the application of the present warranty, or resulting from the removal or replacement of 

any product or element or part covered by this warranty. 

In any case, Dyconn Faucet is not liable for any amount over and above the purchase price paid for the product by the original 

Cleaning and Care

abrasives and cleaning pads. To clean, use a light, non-abrasive cleaning solution or cleaning polish. 

E491008

8

Summary of Contents for All CAT22W













Reviews: