D2366 GSM Radio Signal Analyser – Operation Manual – D2366-OPS2/EU/F10/v4 -
12
Operation – RESULTS
It displays the performance of all cells measured in the survey.
Swap between Summary (basic) and Detailed
views (only in Engineer mode - see next page).
Go to
Main Menu
(see page 8).
Display first and subsequent (weaker) cell’s
results (see next page).
Display previous cell’s results (stronger signal)
(see next page).
NOTE:
when first switched on, the test set will still retain the results from the last survey. These
will be available until a new survey is started.
Summary (basic) View
INDEX
During the survey, each detected cell is given a number. The cell with the
strongest signal is given number 1.
Higher numbers = lower strength signal
GSM
900 or 1800 MHz
The radio frequency band used by the displayed cell
Radio signals using 900MHz penetrate better into buildings.
CELL
Cellular identification number of the cell
SIG Signal
Strength
Shown as a percentage – 33% and above is useable.
BER
Interference
Good = none or low levels
Poor = low to medium levels
Bad = medium or high levels
(see page 17 for more information)
NETWORK
The network name of the displayed cell
(1)
SIM
Not Fitted or Status
(1)
– If the MCC and MNC codes are shown instead of the network name, do another network
search (Engineer mode) or another survey.
