D2366 GSM Radio Signal Analyser – Operation Manual – D2366-OPS2/EU/F10/v4 -
5
Using the Radio Signal Analyser (continued)
6.
RESULTS Screen
(See pages 12 and 13 for information)
Signal strength and quality (BER) of each
cell is shown in decreasing signal strength.
If a number, and not the name of the
network, is shown, another network search
should be done (see page 12).
Press the right button to display the next cell
(weaker signal).
Press the left button to display the previous
cell (stronger signal).
Press the down button to return to the
Main
menu
.
In the main menu, scroll down to display the
Monitor
Screen.
7.
MONITOR Screen
(
See pages 14 and 15 for information)
The display is updated every 6 seconds.
It will normally show the strongest cell.
This display is used to locate an area for the
strongest signal strength.
Use this position when installing the aerial.
(See page 16 for more information)
Press the down button to return to the
Main
Menu.
8.
Select a new survey etc... as required.
9.
To switch off, select Power Off in the
Main
menu, or press the On/Off button until the
Shutdown
screen is displayed.
