Dyaco CT 900 LED, Service Manual

Page: 101 / 125

101
8. Error Messages / Troubleshooting
The incline position doesn’t match console 1 Console is not calibrated. 1 Calibrate the console.
INCLINE ERR ,INCLINE window displays “INCLINE
E33”.
1 Position sensor value of incline motor is
wrong.
1 Turn off the AC switch and turn on power again.
2. Calibrate the monitor.
After pressing “START” button, the treadmill stops
immediately.
Controller is broken. 1 Turn off the AC switch and turn on power again.
2 Replace controller and calibrate it.
Erratic pulse display. 1 Another chest belt in use around treadmill.
2 Other magnetic field disturbance.
3 Receiver is broken.
1 Check for other chest belt use around treadmill.
2 Change the position or direction of treadmill.
3 Replace with new receiver.
FAST/SLOW button of SPEED ADJUSTMENT
SWITCH can’t be used.
Speed button just can press FAST, can’t press SLOW.
Speed button just can press SLOW, can’t press FAST.
1 The connector of SPEED CABLE and
CONSOLE not connected properly.
2 The connector of SPEED CABLE and
SPEED ADJUSTMENT SWITCH
W/CABLE not connected properly.
3 The connector of SPEED CABLE or
SPEED ADJUSTMENT SWITCH/W/CABLE
is damaged.
4 Button of SPEED ADJUSTMENT SWITCH
is broken.
5 The connector of SPEED CABLE or
SPEED ADJUSTMENT
SWITCH/W/CABLE is damaged.
6 The connector of SPEED CABLE or
SPEED ADJUSTMENT
SWITCH/W/CABLE is damaged.
1 Connect cables again.
2 Connect cables again.
3 Connect cable again.
4 Replace with new buttons.
5 Replace with new cable.
6 Replace with new cable.