Dyaco CT 900 LED, Service Manual

Page: 102 / 125

102
8. Error Messages / Troubleshooting
UP/DOWN button of
INCLINE ADJUSTMENT SWITCH can’t be used.
Incline button just can press UP, can’t press DOWN.
Incline button just can press DOWN, can’t press UP.
1 The connector of INCLINE CABLE
and CONSOLE not connected properly.
2. The connector of INCLINE CABLE
and INCLINE ADJUSTMENT SWITCH
W/CABLE not connected properly.
3 The connector of INCLINE CABLE or
INCLINE ADJUSTMENT SWITCH CABLE
got damage.
Button of INCLINE ADJUSTMENT
SWITCH is broken.
5 The connector of INCLINE CABLE or
INCLINE ADJUSTMENT SWITCH
CABLE got damage.
6 The connector of INCLINE CABLE or
INCLINE ADJUSTMENT SWITCH CABLE
damaged.
1 Connect the wires again.
2 Connect the wires again.
3 Replace the cable.
4 Replace buttons.
5 Replace the cable.
6 Replace the cable.
Hand pulse lost its function.
(No pulse displayed on monitor)
1 Hands not on the hand pulse sensors or
only one hand on sensor.
2 The connector of HANDPULSE W/WIRE
and Console not connected properly.
3 The wires got damaged when connecting
the HANDPULSE W/WIRE and Console.
4 Hand pulse board is broken.
1 Two hands hold the hand pulse.
2 Connect the cable again.
3 Replace with new cable.
4 Replace console or Hand pulse board.