- 2 -
M965555 Rev. 1.1
1
1
3
5
7
6
8
9
10
11
2
4
RECESS
SCREWDRIVER
12
CAUTION
INSTALL FITTING
Turn off hot and cold water supplies before beginning.
• Make certain the O-RING SEAL
(1)
is properly seated in recess of faucet body.
• Insert supply HOSES
(2)
, SHANK
(3)
and SPRAY HOSE
(4)
through center hole of sink or mounting surface.
• Assemble RUBBER WASHER
(5)
, PLASTIC WASHER
(6)
, RUBBER & METAL “C” WASHERS
(7)
and long LOCKNUT
(8)
onto SHANK
(3)
from underside of sink. Hand tighten LOCKNUT
(8)
and check that faucet is centered.
• Tighten LOCKNUT
(8)
with WRENCH
(12)
supplied. Insert screwdriver into hole in WRENCH
(12)
and tighten.
• Feed HOSE END
(9)
through HOSE GUIDE
(10)
. Slide other side of HOSE GUIDE
(10)
onto SHANK
(3)
and secure with
LOCK NUT
(11)
. Do not over tighten!
