background image

XV1000 Modem User Guide 

 

 

 

 

  

 

7. XV1000 VDSL Modem Specification 

 

Item 

Specification 

Modulation 

QAM  

Duplexing  

FDD 

Data Transmission 

Symmetric/Asymmetric 

Speed (DSLAM-Modem) 

Downstream: max 10 Mbps, Upstream: max 10 Mbps 

Standards 

ANSI T1E1.4, VDSL Coalition, FSAN 
Ethernet Port 

: RJ-45 (10/100Base-T) 

POTS Line 

: RJ-11 

VDSL Line 

: RJ-11 

Interface 

Console Port 

: RJ-11 

Error detection 

Reed-Soloman 

Size  

152 (w) x 172(d) x 32(h)          (unit: mm) 
Input  

: AC 110/220V 

Frequency 

: 50/60 Hz 

Power 

Output

 

: 5V DC

 

 

Chapter 2. Before Installation

 

 
Explained in this chapter are issues that users should take note of before installing the modem. 
This chapter includes the following sections: 
 

Safety Check 

Before installation 

Preparing cables 

 

 

1. Safety Check 

 
The following items should be checked before the installation and use of the modem. 
 

Electrical safety 

 

Customers shall not disassemble the unit in any case, especially when the power is being applied. 

Ensure that there are no such matters that may pose danger to the installer in the installation area: 
wet floor, ungrounded cable, worn-out power cords, floor without proper ground.  

“ This equipment does not directly connected to  ISDN/PSTN line”  

“ This equipment should be connected to XV2000 only.”  

 

Site of Installation 

 

During the operation of electrical devices, heat is inevitable. Ensure that the device is installed in such 
an environment that proper ventilation will be able to dissipate heat, otherwise the device may not 
function properly. 

 

2. Telephone Network Service/PC Specification 

 

Telephone Network Service 

 

XV1000 VDSL modem is to be used in areas where telephone network service is provided. 
Users already subscribed to the telephone service can use the telephone line as it is. New users need 
to ask the regional telephone company for the telephone service and should have lines installed. 

 
 

PC Specification 

 

To connect XV1000 to the PC, a LAN card (10Base-t or 10/100Base-T) must be installed inside the PC. 

Summary of Contents for XV1000















Reviews: