8
Operating and installation instructions
RF-KIT Power Amplifier RF2K-S
Indication area
Personalization Text
An individualization text to be edited in the user menu (e.g. call sign) is displayed here
5. Using the device locally
5.1 Turning device on
►
Turn on the device using power switch On/Off (1).
The Touch screen (2) lights up and shows the user interface:
Indication area
Forward Power
(analog PEP and digital Minimal / Maximal)
Indication area
Reflected Power
(analog PEP and digital Minimal / Maximal)
Indication area
SWR
(analog PEP and digital Minimal / Maximal)
Indication area
Error Messages
Indication area
Choosen band
Switching area/Indication area
Actually Choosen Antenna
Switching area
Interface
Switching area/
Indication area
Antenna Tuner
Indication area
Operating Parameters
(selected interface, end transistor supply voltage, output stage temperature, output stage current consumption)
Indication area
Personalization Text
An individualization text to be edited in the user menu (e.g. call sign) is displayed here
Switching area
Menu
Touching this switching area activates the user menu
Indication area
Frequency TRX
Switching area
Tune
Touching this switching area triggers a tuning process
Switching area
Reset PA
If the PA switches off due to an error, it is reactivated after actuating this switching
area; the error message (e.g. “zu hohes SWR“ vanishes)
Switching area
Standby
Switching between
“Standby“ (red)
“Operate“ (green)
