16
Operating and installation instructions
RF-KIT Power Amplifier RF2K-S
5.2.5 VNC
With a VNC (Virtual Network Computing) connection, the device can be
remotely controlled and operated from any PC, tablet PC or even smart-
phone connected to the Internet or local network using VNC software
(remote operation).
►
Tap in the switching area VNC to check the IP Address currently
assigned to the PA.
Switching area
Close
Touching this switching area closes the user menu;
subsequently the main screen will be displayed
Indication area
IP Adress
A VNC configuration will be available in one of the next firmware versions
as part of an update.
5.2.6 Interface
IIn future software versions the data connection between control transmit-
ter/transceiver and PA will be configured in this screen mask.
This part of the firmware is currently still under development.
Switching area
Close
Touching this switching area closes the user menu;
subsequently the main screen will be displayed
